How to Connect Heavy Duty Warehouse Racking Systems?
How to Connect Heavy Duty Warehouse Racking Systems?
Heavy Duty Warehouse Racking Systems are the most widely used form of racking system in warehouses. Generally, it is used for placing goods that stored directly on pallets.
One Heavy Duty Storage Shelf is composed of upright post, horizontal beam, cross brace, diagonal brace and self-locking bolt, which can effectively prevent the shelf from losing stability if the bolt was loose. The beam is made of special cold rolled p-type closed beam. The structure has the characteristics of simple, light weight but with strong bearing capacity and low cost.
It is applicable to the load bearing range of 1000kg-5000kg per layer. According to the structure design, the racks can be divided into selective pallet racking, drive in pallet rack system, radio shuttle pallet racking system, gravity racking system, push back pallet raking, heavy duty cantilever racking system etc.
In the following, you will see the correct way of connecting a rack
.
1.Firstly,connect the cross brace, diagonal brace with screw on the upright post.
2.Secondly, assemble the two upright frames (one frame = two upright pieces with several cross brace and diagonal brace),then stand them on the ground.
3.Adjust the distance between the two uprights according to the length of beam, then install the beam.
4.The same steps go with the installation of connect racks(additional racks)
Order Online Now!
